There were an overwhelming number of requests for this to be added to the Refractor, so this updated version implements the switch.As of its release, the Refractor is the only DIY version of the Centaur or KTR that uses the correct true/buffer switch wiring from the original unit. Alchemy Audio. Klon Centaur / KTR Documentation $88 Project Details.

Solstice (125B) Marshall Shredmaster Documentation $12 Project Details.

His sales tactics were a little unconventional: the only way to buy a Centaur was to call and talk to him on the phone, and he’d ask you about your rig and your expectations in order to make sure that the Centaur was a good fit for you.

For those who don’t mind getting their hands dirty, Aion Electronics offers ready-to-solder PCBs for DIY guitar pedals, including many vintage circuits you may not have seen elsewhere.

About This Listing. Shipped From. CTS potentiometers are usually +/-20%, but can get down to +/-10% if you special-order them. Fuzz. It’s available separately as the I’m going to bust a few myths throughout this article, but let’s start off with a big one: The only change that impacted the tone at all was the addition of You may hear someone swear that a “Gold Horsie” Centaur sounds different than the later Silver ones—but the truth is that if a person were to A/B a Gold with a Silver, any tonal differences they heard would be due to component tolerances and nothing more. A few notable ones are the However, someone later pointed out that of course S698 was a Silver as well, so we were definitely not looking at the “Silver Specs”, at least not in a manner that contrasted with S698’s “Gold Specs” as was commonly claimed for awhile.

Due to its unique buffered bypass arrangement, for most clones you have to solder three resistors to the switch itself and it can be time-consuming. Effekgeräte für Gitarre und Bass bauen leicht gemacht! I ordered some rubber stamps but would love some info on how you got yours to look so great! Oct 9, 2019 #1. Aion Electronics; Aion Electronics Andromeda (Nobels ODR-1 clone) Overdrive Guitar Effects Pedal Alchemy Audio Built. The left toggle is for Rock/Rawk, as on the original pedal. Modulation. Refractor Bausatz. Toggle navigation Aion Electronics Projects I just built a Nobels ODR-1 style drive. Bill has always claimed that he has a huge stock of a certain type of germanium diode that are long out of production and that can no longer be found anywhere because he bought them all up in the early 1990s.

Der Versand läuft wieder, wir arbeiten gerade den Rückstand aus der Urlaubswoche ab.

Quick Shipper.

Well, all told, it was nearly four years between the time the Centaur was discontinued and its successor was first released, the Klon KTR. As a result, there are a number of gold enclosures without the centaur and a number of silvers with it.Before too long, the gold enclosure was retired completely in favor of the silver enclosure. C’est vraiment un PCB très impressionnant, très compact, mais néanmoins réalisable avec des composants classiques et sans avoir à placer les résistances verticalement (je déteste).Le PCB est d’excellente qualité, et le guide de réalisation … "The diode I have always used is a germanium diode with the part number 1N34A, but you should understand that this particular part has since the 1950s or so been manufactured by literally hundreds of different companies, and having listened to as many different ones as I have, I can say with confidence that they all sound somewhat different in my circuit, and often they sound VERY different." He maintains that these exact diodes are essential to the sound and that no true Centaur clone can ever be built because he’s the only one who has them.Bill has claimed the diodes are 1N34A, but that they were from a specific manufacturer and that other 1N34As do not sound the same.

3,603. It had been selling well and had never been more popular, but he later said that the stress was too much since he was building them all himself and that he had to come up with a more sustainable strategy.Bill’s solution to the problem was to redesign the circuit so that it could be built by a contract manufacturing firm. Watch.