If your Hue Hub is offline, and your automation tries to turn on/off a Let’s assume I want to start tracking my We now have a couple of options.

Once the alert component has been triggered, the device that has an issue and raised the alert can’t be seen in the alert. I might need think about doing an updated version of this article with more up-to-date info.Although known_devices doesn’t exist anymore, the device trackers should still be created. Ping? Hello Phil! This can happen by querying your wireless router or by having applications push location info.The following optional parameters can be used with any platform:The extended example from above would look like the following sample:Multiple device trackers can be used in parallel, such as Here’s an example configuration for a single device: To get started add the following lines to your configuration.yaml (example for Netgear): Please check the status of this device as some features may stop functioning.Taking this approach, there’s only one automation that needs to be updated when I add a new device I need to monitor.Now that we know what the state of our hubs are, we could even get a bit smarter. So far so good everything works here.

This is what my setup looks like. To do that, you could do something like this: Enter your email address below to receive my latest blog posts and videos about Home Automation in your InboxBy default the Device Trackers will report the devices as “Home” or “Not Home”. Many of us learned the hard way (myself included) that automating your home and daily routine is useless if the 1% of time that it fails it doesn’t do so gracefully (with the respective manual controls in place). You can then have Home Assistant alert you when something isn’t right. Depending on what type of method you’re using to get the devices.What method are you using to check the status of devices? This tracker doesn’t need to know the MAC address since the host can be on a different subnet. If you’re planning on using something like the My preferred method is networking tracking. I have found that more reliable than some of the fancier integration with my WiFi controller or router.

Menu: Configuration-> Integrations. Now that known_devies has been deprecated home assistant is no longer automatically creating the ‘device_tracker’ entities based on the known_devices.yaml file. To make that look a little better, you can edit the known_devices.yaml file that Home Assistant created now that device tracking is enabled. Ideally, this would be done dynamically, but all my devices are set on reserved IPs so a manual input would work too.Check out this GitHub repo, seems to have what you’re asking for I actually tried to do the same thing this weekend. Once you’ve been alerted, you can take action before a family war breaks out, or your Smart Home makes you look like a fool.There may be times where you may need to get a little more complex. The device tracker allows you to track devices in Home Assistant. Now if either of the Hue Hub or Harmony Hub go offline, this alert will be triggered.One of the things I don’t like about the Alert Component is that it requires an additional binary sensor to be setup to trigger the alert for multiple devices. The ping device tracker platform offers presence detection by using ping to send ICMP echo requests. So now Home Assistant is monitoring our Harmony Hub. There is two ways to integrate iCloud in Home Assistant. If either of those stop working, then watching TV can turn into a complex process  The last thing you want to be doing is troubleshooting why a light isn’t turning on, or trying to get the TV working before a live broadcast is about to begin.By monitoring our smart devices, we can have a constant health check running against our Smart Home. For that we would just copy-and-paste the code above and change it for the Hue Hub entity. You can add a picture, icon and a name for it. Here’s some of the gadgets I’m using to make my own home smarter.I’ve created a Kit where you can see all the Smart Home Devices I use to automate my life.Straight away we can see some potential pain points. Getting Smart – Disabling Automations On Device State Using Home Assistant Device Trackers to watch the Critical Components of your Smart Homehttps://philhawthorne.com/wp-content/uploads/2015/12/philhawthorne_black.pnghttps://philhawthorne.com/wp-content/uploads/2017/06/observation-1459105.jpgEnabling Alexa Calling & Messaging for International UsersSetting up a local Mosquitto server using Docker for MQTT Communication So what happens when something goes wrong? How many moving parts do we have?

Here is an example of a message which might be sent to me.Harmony Hub has gone offline. Another option is to make the alert more generic, and add another template sensor which we can use to monitor both devices.First, let’s add a new template sensor that will change to “on” when either the Harmony Hub or Philips Hue Bridge go offline. Installed this repo: However couldn’t get any of the UI elements to work for me. We can add another Alert component for each new device we want to track. device_tracker.see and templates I got the following scenario: I get the Battery Stats of my Phone from Tasker, via http post stored in an entity sensor, every 10 mins.

Which can stop our Heating and Cooling automations, secondary lighting, and On the less critical side of things, the Harmony Remote Control and Sonos speakers are an integral part of our entertainment system. For my

I had been using this solution for about a year now and it was working wonderfully to monitor all my core devices in Home assistant. You can easily expand on the examples I’ve given here to track virtually all Smart Home devices that can have their presence seen in Home Assistant. The last thing you want to be doing is troubleshooting why a … If the Hue Hub is not online, any automation with that condition won’t be fired.You could also get a bit smarter, by adding your automations that use Hue to a group, and then disabling all automations in that group when the Hue hub goes offline.