The relay module we’re using is 1-channel. There are two fixed contacts, a normally closed one and a normally open one.

Hello arduino users! NO (Normally Open): A normally open configuration works the other way in which the relay is always open until you send a signal from the Arduino to the relay module to close the circuit.

The Arduino can be programmed to turn on the relay when a certain event occurs, for example when the temperature of a thermistor gets higher than 30°C. When a low level is supplied to signal terminal of the 8-channel relay, the LED at the output terminal will light up. อุปกรณ์ที่ต้องใช้ใน บทความ  สอนใช้งาน Arduino ควบคุมเปิดปิดไฟบ้าน ด้วย Relay Module 220VACให้ต่ออุปกรณ์ตามรูปข้างบน แล้ว อัพโหลด โค้ดตัวอย่างด้านล่างลง Arduino uno r3ถ้าอัพโหลดโค้ดลงบอร์ด Arduino สำเร็จ ไฟ จะติด แล้ว ดับ ตามรูปด้างล่างจะเห็นว่า ถ้าเรายังไม่ส่งสัญญาณมาควบคุมรีเลย์ ไฟสถานะที่รีเลย์ยังไม่ทำงาน หลอดไฟจะยังไม่ติดเพราะ ขาที่เราต่อ ขา2 ขา3 ยังไม่ติดกัน ขา2 จะไปติดกับ ขา1 อยู่ตอนยังไม่สั่งงานรีเลย์ ทำให้ไฟไหลไม่ครบวงจร  แต่ถ้าเราจ่ายสัญญาณดิจิตอลมาควบคุมรีเลย์ ไฟสถานะที่รีเลย์จะติด และมีเสียงการทริก ขา2 จะเด่งมาติดกับขา3 ไฟจะไหลควบวงจร หลอดไฟจะติดแต่ถ้าเราต่อหลอดไฟตามรูปด้านล่างแล้วยังไม่ส่งสัญญาณ มาให้รีเลย์ ขา 1 และ ขา 2 ของรีเลย์ จะติดกัน ทำให้หลอดไฟติดทันที โดยยังไม่ส่งสัญญาณมาควบคุมรีเลย์จะเห็นว่ารีเลย์จะเหมือนสวิตช์ทางไฟฟ้า ที่ใช้สัญญาณ ดิจิตอล 1 0 มาควบคุมการเปิดปิด เราสามารถนำ Relay Module #11 สอนใช้งาน Arduino สัญญาณ Analog InPut ตัวต้านทานปรับค่าได้ ปรับความสว่างหลอดไฟ LED#30 สอนใช้งาน Arduino บันทึกข้อมูลลง SD Card และ อ่านข้อมูลจาก SD car#38 สอนใช้งาน Arduino Rfid อ่านบัตรคีย์การ์ด ควบคุมเปิดปิดไฟ LED____________________________________________________________________________________________________การเขียนโปรแกรมเบื้องต้น Arduino กับ Visual Basic (การเขียนโปรแกรมเบื้องต้น Arduino กับ Visual Basic (การเขียนโปรแกรมเบื้องต้น Arduino กับ Visual Basic (การเขียนโปรแกรมเบื้องต้น Arduino กับ Visual Basic (_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________สอนใช้งาน NodeMCU ESp8266 สัญญาณ Digital input output ควบคุมไฟวิ่ง LEDสอนใช้งาน NodeMCU ESp8266 สัญญาณ Digital input output กดปุ่มควบคุมเปิดปิดไฟ LEDสอนใช้งาน NodeMCU ESp8266 สัญญาณ Analog input output ควบคุมความสว่าง หลอดไฟ LEDสอนใช้งาน NodeMCU ESp8266 เชื่อมต่อ จอ LCD แบบ I2C แสดงค่าตัวแปลต่างๆออกจอ LCDสอนใช้งาน NodeMCU ESp8266 เปิดปิดไฟบ้านผ่าน Websiteสอนใช้งาน Bluetooth Module HC05 เชื่อมต่อกับ Arduino DHT11 ส่งค่าอุณหภูมิและความชื้นเข้ามือถือ แบบ Real Timeสอนตั้งค่า Bluetooth Module HC05 เป็น ตัวส่ง(Master) และ ตัวรับ(Slave)สอนตั้งค่า เปลี่ยน password และ ชื่อ Bluetooth Module 4.0สอนใช้งานเชื่อมต่อ Bluetooth Module4.0 กับ Application ในมือถือสอนตั้งค่า Bluetooth Module 4.0 เป็น ตัวส่ง(Master) และ ตัวรับ(Slave)สอนใช้งานเชื่อมต่อ Bluetooth Module 4.0 เปิดปิดไฟบ้าน____________________________________________________________________________________________________

After the coil is de-energized, the electromagnetic force disappears and the armature moves back to the original position, releasing the moving contact and normally closed contact. So the armature overcomes the tension of the spring and is attracted to the core, thus closing the moving contact of the armature and the normally open contact (or you may say releasing the former and the normally closed contact). There are other options such as a 2-channel relay which consists of two 1-channel relays on a single PCB. Im sorry if im posting this thread in the wrong place this is my first post and you can tell i am a noob (obviously). In this Arduino relay tutorial, I will show you how to use a relay with microcontrollers. Since the Arduino operates at 5V it can’t control these higher voltage devices directly, but you can use a 5V relay to switch the 120-240V current and use the Arduino to control the relay.

This is a 8-channel LOW level trigger relay and it can be applied to Arduino and Raspberry Pi. If a periodic high and low level is supplied to the signal terminal, you can see the LED will cycle between on and off.